Common problems with Range Rover Sport we have rectified

An annoying “chirping” noise when engine at idle was fixed by changing the drive belt idler pulley to a later type

If the parking brake fails to release reject any attempt by a mechanic or tow truck operator to cut the cable because this will invariably cause failure of the control module. That is completely unnecessary because there is an emergency release under console near the hand brake switch.

A knocking sound from the front suspension at low speed, also when applying the foot brake proved to be worn lower suspension arm bushes. Rather than just replace the bushes  – a complicated procedure, GCA replace the complete arm assembly prior to a 4 wheel alignment to prevent uneven wear on tyres.